Using the TPA102 MSOP EVM With the
3.3.4Power Requirements
The TPA102 MSOP audio power amplifier evaluation module can operate from a VDD voltage between approximately 2.5 V and 5.5 V.
The TI
The platform is equipped with overvoltage and
VDD voltage applied to platform screw terminals J6 must not exceed the absolute maximum rating for the TPA102 amplifier IC installed on the eval- uation module (5.5 V), or damage to the IC may result. In no case should VDD voltage of the incorrect polarity or in excess of 6.1 V be applied to screw terminals J6 of the platform, or the power protection circuit on the
-VDD line will trip.
VCC voltage applied to the platform must not exceed the maximum voltage input specified for the voltage regulator module installed in socket U6 (12
V for the SLVP097), or damage to the voltage regulator module may result.
In no case should VCC voltage applied to the platform exceed 15 V, or the overvoltage protection circuit on the VCC bus will trip.
Details