Using the Software | Texas Instruments TPA2028D1YZFEVM guide

Operation

www.ti.com

2.1.3Using the Software

1.Start the TPA2028D1 Interface by clicking the Start menu and clicking on the TPA2028D1 Interface icon.

Figure 3. Starting the Software

2. The TPA2028D1 software interface is as shown in Figure 4.

4	TPA2028D1YZFEVM	SLOU283 –February 2010
		Submit Documentation Feedback

Copyright © 2010, Texas Instruments Incorporated

Image 4

Texas Instruments TPA2028D1YZFEVM manual Using the Software, Starting the Software

Contents

TPA2028D1YZFEVM Introduction Operation Software Installation SequenceEvaluation Module Preparations Found New Hardware Wizard Advisory Screen Using the Software Starting the Software Software Interface Shutdown Control Connect I2C Controls to JP3 TPA2028D1YZFEVM Schematic TPA2028D1YZFEVM YZF-Device Schematic, TPA2028D1YZFEVM Schematic TPA2028D1YZFEVM PCB Layers TPA2028DYZF1EVM YZF-Device Top Layer TPA2028D1YZFEVM Parts List Bill of Materials for TPA2028D1YZFEVM Shunts Evaluation BOARD/KIT Important Notice FCC Warning