![2.3 Quick Start List for Stand-Alone](/images/new-backgrounds/16979/1697927x1.webp)
Quick Start List for
2.3 Quick Start List for Stand-Alone
Follow these steps to use the TPA6102A2 EVM
Figure
2
5 |
4 |
6 |
6 |
4 |
†Due to the very small size of the MSOP IC package, the standard part number TPA6102A2 is
Power supply
1)Ensure that all external power sources are set to OFF.
2)Connect an external regulated power supply set between 1.6 V and 3.3 V
Inputs and outputs
3)Ensure that signal source level is set to minimum.
4)Connect the audio source to the module IN1, IN2, and GND pins taking care to observe marked polarity.
5)Connect the shutdown pin to VDD through a normally open switch.
6)Connect
7)For line output, connections to the VO1 and VO2 pins must be made through
8)Verify correct voltage and input polarity and set the external power supply to ON.
The EVM should begin operation.
Quick Start |