www.ti.com
Kit Operation
Place the CD-ROM into your PC CD-ROM drive. Locate the Setup program on the disk, and run it. The Setup program will install the TSC2007 Evaluation software on your PC.
Accept the license agreement, and continue the installation.
When the installation completes, click Finish on the TSC2007EVM installer window. You may be prompted to restart your computer.
When installation is complete, attach a USB cable from your PC to the USB-MODEVM interface board. As configured at the factory, the board is powered from the USB interface; so, the power indicator LEDs on the USB-MODEVM should light. Once this occurs, launch the TSC2007 evaluation software on your PC. It is suggested that users read the readme_install.txt file for up-to-date, step-by-step instructions.
The software should automatically find the TSC2007EVM, and a screen similar to the one shown in Figure 2 should appear.
Figure 2. Default Software Screen
In order to use the touch screen features, a user needs to connect a 4-wire resistive touch screen to J1 of the TSC2007EVM, as described previously.
SLAU199 –March 2007 | TSC2007EVM and TSC2007EVM-PDK User's Guide | 7 |
Submit Documentation Feedback
