ENGLISH
CD OR CD+G OPERATION
TIME DISPLAY SELECTION
Press the DISPLAY button repeatedly during normal play. The display changes in the following sequence:
REMAIN (Remaining playing time for the current track)
REMAIN TOTAL(Total remaining playing time for the disc)
TOTAL(Elapsed playing time for the disc)
Notes:
!During programmed play “REMAIN TOTAL” and “TOTAL” cannot be displayed.
!The displayed playing times may differ slightly from the times listed on the notes accompanying the disc.
PROGRAMMED PLAY
Up to 60 selections, from up to 3 discs, can be programmed for play in any order.
!To begin the programming procedure, select the “CD” function first.
!The discs or tracks must be programmed in the stop mode.
!The same disc or track can be programmed more than once.
!Load the disc that you want to programmed before starting programmed play.
Programming procedure
Follow the example below to program tracks 2 and 6 on DISC 1, track 9 on DISC 2 and all tracks on DISC 3. In this example, each disc has 9 tracks and DISC 3 is in playing position.
1. Press the PROGRAM button.
3 | TR | MEMORY |
2
1
2. Select DISC 1 by pressing the DISC 1 button.
!The DISC SKIP button on the remote control can also be used.
3 | TR | MEMORY |
2
1
3. Select track 2 by pressing the SKIP 
button.
!The number button on the remote control can also be used.
3 | TR | MEMORY |
2
1
4. Press the PROGRAM button.
3 | TR | MEMORY |
2 |
|
|
1
5. Select track 6 by pressing the SKIP 
button.
3 | TR | MEMORY |
2
1
6. Press the PROGRAM button.
3 | TR | MEMORY |
2
1
E13
