CASSETTE OPERATION
CONSECUTIVE PLAY
1.Turn on POWER (1).
2.Press FUNCTION SELECT button to select the TAPE function, then load cassettes into both decks (5).
3.Depress PLAY button of Deck 2, which will begin to play.
4.Depress PAUSE button of Deck 1, then the PLAY button of Deck 1. When Deck 2 stops, either by the pressing of the STOP/EJECT button or because the tape reaches its end, Deck 1 will begin to play.
MICROPHONES/ECHO
When either or both microphones are plugged into the Microphone Jacks (3), their output is mixed with the playback from cassette tapes. Adjust MIC VOLUME (2) for best balance between playback and microphone levels.
SING ALONG WITH A TAPE
1.Following instructions for PLAYBACK.
a)Turn on POWER (1).
b)Press FUNCTION SELECT button to select the Tape function, then load cassette(s) into Tape Deck 1, Tape Deck 2 or both Decks (5).
c)Depress PLAY button(s) (10) of Deck 1 or Deck 2.
d)Adjust MASTER VOLUME (6), and
BA LA NC E (8 ) co nt ro ls to yo ur pleasure.
e)Adjust PITCH (Tape Speed) (7) control if desired. This will alter pitch and tempo. If music is too high for your voice, slow down the tape and it will lower the pitch. If too low, speed up tape and pitch will raise. You will feel a distinct click when the PITCH knob is
f)To stop tape on either Deck, press STOP/EJECT button (9) on that Deck once. (Pressing a second time will eject that tape.) When tape reaches its end, that deck will automatically stop and its PLAY button will be released.
2.Follow instructions for MICROPHONES/ ECHO. When either or both microphones are plugged into the Microphone Jacks (3), their output is mixed with the playback from cassette tapes. Adjust MIC VOLUME
(2) for the best balance between playback and microphone levels.
Adjust ECHO (4) to add depth and richness to vocals.
3.Adjust MASTER VOLUME, ECHO AND PITCH Controls to your satisfaction. Your voice will be combined with the music and will beheard throughthe loudspeakers.
4.With Singing Machine or similar multiplex cassettes, you can sing duets along with
the recorded artist and background music. You can also eliminate the vocal track and do a so lo pe rf or ma nc e wi th th e ba ck gr ou nd mu si c by tu rn in g th e BALANCE Control (8).
RECORDING TO TAPE
1.Load a blank cassette in Tape Deck 1.
2.Load a Singing Machine or any other prerecorded tape into Tape Deck 2.
3.Start Tape Deck 2 by pressing the PLAY button.
4.Press both RECORD and PLAY button of Tape Deck 1 at the same time. The combined output of your voice and the playback of Tape Deck 2 will be recorded on the blank tape in Tape Deck 1.
ENGLISH
E16