PLAY A TONE
Listen to the tone
This drum module has a total of 50 preset tones.
Note: The preset tone setting is 001 once powered on.
1. Press [ tone / volume ] button.
The tone indicator lights and the current tone number will appear.
2.Press [ + ] or [ - ] button to select one of the tones and listen to the the Tone number
(Reference tone list: page E14)
3.Press [ start - stop ] button and the beat indicator will flash.
The tone will start playback from the beginning.
4. The tone will stop when it reaches the end.
You can stop the tone during playback by pressing the [ start / stop ] button.
The ASSIGN pad’s indicator flashes at the first beat of each measure.
Note: The ASSIGNED pad’s indicator will not illuminate when both [ hi- hat ] and [ kick ] buttons are pressed at the same time.
Beat indicator
Beat indicator
English
Select the tone volume
1.Press the [tone/volume] button to select the volume of the tone, which will display “AXX”. XX = Level value 00 to 31
2. Press [ + ] or [ - ] button to adjust the volume of the tone accompaniment.
*Volume of the tone will not reset to default when power is ON.
Adjust the tones tempo
1.Pressing the [ tempo + ] or [ tempo - ] button will display the current tempo value.
tempo/tap
2. Press the [ tempo + ] or [ tempo - ] button to increase or decrease the tempo. The tempo value will range from 30 to 280.
- Hold down either the [ tempo + ] or [ tempo - ] button to change the setting from high to low speed.
- Pressing the [ tempo + ] and [ tempo - ] buttons at the same time will reset the tempo to the default value.
Note: Approximately 2 seconds after you stop pressing the [ tempo ] button, the display will change to your selected song or kit number instead of the tempo value.
