The Singing Machine STVG-700 manual Making the Connections, Connecting Power

MAKING THE CONNECTIONS

CONNECTING POWER

You can power the system from a standard AC outlet by using supplied powercord.

Caution: The supplied AC power cord, has a polarized plug that fits into the wall outlet only one way. If the plug does not fit properly, turn it over and try again.

Do not force it.

CONNECTION TO TV SET

For song lyrics from CDG to appear on the TV screen you must connect the included video cable (yellow colored RCA single-plug) to the Video Output jack on the back of your STVG-700 unit. Then connect the other end of the video plug (yellow) to the Video Input jack of the television. If your television does not have the required Video Input, you will need an RF Modulator (Radio Frequency Modulator), which connects through your TV antenna or cable line and serves as Video Input. You must change your VCR or TV's source selection to Aux In or Video(x) when connecting your karaoke machine to a Aux In or Video(x) input. Your VCR or TV documentation will explain how to change the input source selection.

CONNECTING AN AUDIO SOURCE FOR INPUT

To connect another audio source (such as a Tuner, an A/V Receiver or a VCR) so you can sing along with its music, simply connect the Audio Output jacks (Red & White TSA jacks) to the system's AUX IN R & L jacks.

ANTENNA CONNECTION

1. ROD ANTENNA (75 OHM)

In a normal reception area, the built-in ROD antenna will deliver a sharp clear picture. When operation, extend it's length and adjust it's direct & angle for the clearest picture.

2. External antenna adaptor (PAD)

AUX VIDEO

OUT IN IN

L

BRIGHT CONTRAST V-HOLD

TV/AV ANT

R

VIDEO

OUT

300 OHM FEEDER CONNECTION

75 OHM COAXIAL CABLE CONNECTION

7