| Contents | |
COPYRIGHT DECLARATION | 1 | |
COMPLIANCES | 1 | |
1. Introduction | 1 | |
2. Getting Started | 1 | |
2.1 | Unpacking and Inspection | 1 |
2.2 | Equipment Checklist | 1 |
2.3 | Printer Parts | 3 |
3. Setup | 4 | |
3.1 | Setting Up the Printer | 4 |
3.2 | Loading the Ribbon | 5 |
3.3 | Loading Label Stock | 7 |
3.4 | External Label Roll Mount Installation (Option) | 9 |
3.5 | 11 | |
3.5.1 Loading the Paper in | 14 | |
3.6 | Cutter Module Installation (Option) | 16 |
3.6.1 Loading Label in Cutter Mode | 19 | |
3.7 | Instructions to Top Cover Operation | 20 |
3.8 | Diagnostic Tool | 22 |
3.8.1 Start the Diagnostic Tool | 22 | |
3.8.2 Printer Function (Calibrate sensor, Ethernet setup, RTC |
| |
setup………) | 23 | |
3.9 | Setting Ethernet by Diagnostic Utility (Option) | 24 |
3.9.1 Using USB interface to setup Ethernet interface | 24 | |
3.9.2 Using | 25 | |
3.9.3 Using Ethernet interface to setup Ethernet interface | 26 | |
3.10 Install Memory Card | 28 | |
4. Power on Utilities | 30 | |
4.1 | Ribbon and Gap/Black Mark Sensor Calibration | 30 |
4.2 | Gap/Black Mark Calibration, | 31 |
4.3 | Printer Initialization | 35 |
4.4 | Set Black Mark Sensor as Media Sensor and Calibrate the |
|
Black Mark Sensor | 36 | |
4.5 | Set Gap Sensor as Media Sensor and Calibrate the Gap Sensor | |
| 36 |
|
4.6 Skip AUTO.BAS | 36 | |
5. Maintenance | 38 |
i