Set Gap Sensor as 1. | Turn off the power switch. | |
Media Sensor and | 2. | Hold on the button then turn on the power switch. |
Calibrate the Gap | 3. | Release the button when LED turns red/amber after 5 |
Sensor |
| green/amber blinks. (Any red/amber will do during the 5 |
|
| blinks). |
|
| The LED color will be changed as following: |
|
| Amber red (5 blinks) amber (5 blinks) green |
|
| (5 blinks) green/amber (5 blinks) red/amber (5 |
|
| blinks) solid green |
Skip AUTO.BAS 1. Turn off printer power.
2.Press the FEED button and then turn on power.
3.Release the FEED button when LED becomes solid green.
The LED color will be changed as following:
Amber red (5 blinks) amber (5 blinks) green (5 blinks) green/amber (5 blinks) red/amber (5 blinks) solid green
4.Printer will be interrupted to run the AUTO.BAS program.
45
