8.Using a pliers, twist the tabs of the base supports to align with the slots. Remove only one of the base supports (see below). Spread the base apart slightly to remove the impeller fan.
9.Remove the four 4 mm machine screws and lock washers securing the impeller fan.
10.Reverse this procedure to reassemble with the new impeller fan.
Twist | Remove | |
one of | ||
tabs | ||
these | ||
| ||
| base | |
| supports |
Figure 16: Twist tabs
Figure 17: Electrical schematic
www.thermastor.com • sales@thermastor.com |
