PO Box 8680 • Madison, WI 53708
Phoenix Axial Air Mover
Owner’s Manual — Phoenix Axial Air Mover
Installation, Operation & Service Instructions
Read and Save These Instructions
The Phoenix Axial Air Mover is the industry’s only Air Mover specifically engineered with patent pending FOCUSTM Technology. FOCUSTM Technology revolutionizes evaporative drying by producing air velocities greater than competitive product offerings. This highly focused air flow is directed towards the restoration industry’s problematic drying areas namely, carpet and pad,
The Phoenix Axial Air Mover includes a
enclosure designed to fit existing vehicle rigging,
Conventional air movers create a circular air jet. With a circular air jet the only way to get air into the square corner is to point the fan towards the corner. This angle toward the wall wastes valuable air velocity and throw distance. FOCUSTM Technology creates an air jet with a square corner, resulting in optimized drying ability. In addition, the Axial Air Mover features built in 4.5° positioning which increases the fans ability to dry.
Dry fast, smart and profitably with Phoenix.
Phoenix Axial Air Mover
•Approximately 3000 CFM air flow directed where you need it.
•Operator interface conveniently located for easy access, featuring: power indicator lamp, large three- position switch, circuit breaker, GFCI outlet, and hour meter.
•
•Integral circuit breaker eliminates nuisance trips to the breaker box.
•Axial Air Mover itself is also GFCI protected.
•Units interlock for ease of stacking during storage and handling.
•Weighs 2.5 lbs less than competitive units.
•Linear low density polyethylene construction.
•Low bearing temperatures increase motor life.
•Permawick®, low maintenance, long life lubrication.
Phoenix Axial Air Mover PN 4025200
Specifications subject to change without notice. | Revised 1/07 |
www.thermastor.com • sales@thermastor.com |