Therma-Stor Products Group TS-285 Intended Application, Safety Certifications, Power Requirements

Models: TS-285

1 9
Download 9 pages 7.25 Kb
Page 3
Image 3
2 Intended Application

Vérifier la protection du différentiel avant chaque utilisation en appuyant sur le bouton “ test “. Si l’appareil fonctionne correctement, le bouton “ reset “ ressort.

Avant de laisser un appareil aéraulique axial sans surveillance, s’assurer que les enfants n’ont pas accès à l’équipement. Ne pas laisser les enfants jouer avec l’appareil ou à proximité de l’appareil ou dans l’air qu’il projette.

Pour réduire le risque d’incendie ou de choc électrique, ne pas utiliser ce ventilateur avec un dispositif de commande de vitesse à semi-conducteurs.

2 Intended Application

The Phoenix Axial Air Mover has changed the drying industry by minimizing overall drying time on water restoration jobs. The Phoenix Axial Air Mover uses patent pending FOCUS Technology to maximize air velocity across floors and along walls for longer distances. By maximizing the air velocity, water evaporates more quickly from the carpet, pad, sub-floor, wall, and sill plate.

3 Safety Certifications

The Phoenix Axial Air Mover (P/N 4025200) conforms to UL STD 507. Certified to CAN/CSA STD C22.2 No. 113.

5 Power Requirements

5.1 Daisy Chaining

The Phoenix Axial Air Mover draws 2.5 amps. The 12 amp, on-board circuit breaker will allow four (4) Phoenix Axial Air Movers on one circuit. When daisy-chaining the Phoenix Axial Air Mover, turn on one Phoenix Axial Air Mover at a time to prevent excessive current inrush caused by four units starting at once.

A ground fault in the Phoenix Axial Air Mover or anywhere on the circuit will cause the Axial Air Mover’S GFCI to trip. After rectifying the ground fault, reset the GFCI by pressing the reset button.

5

Figure 1: Too many Axial Air Movers daisy-chained

4 Specifications

Part No. 4025200

Power

1/4 hp 1-phase 110/120 VAC 2-speed

 

4-pole, PSC Electric Motor.

CFM

Approximately 3000

Cord

20 ft Power Cord

Outlet

15A UL Rated GFCI Duplex Receptacle

Current Draw

2.5 Amps

Voltage

115 VAC

Warranty

Year One - 100% parts and labor

 

(all components)

 

Year Two - 100% parts only (all components)

 

Years Three through Seven - Only materials

 

and workmanship of the housing are covered.

Dimensions

 

Cabinet

Width 19.9”

Height 19.5”

Depth 15.2”

Weight

29.5 Lbs

5.2 Recommended Use

Recommended use(s) of on-board duplex GFCI are shown.

Note: Standard 115 VAC electrical outlets.

15 Amp

15 Amp

15 Amp

Outlet

Outlet

Outlet

Phoenix 200 MAX

Phoenix Mini-Guardian

Figure 2: Duplex GFCI use

Toll-Free 1-800-533-7533

www.thermastor.com • sales@thermastor.com

Page 3
Image 3
Therma-Stor Products Group TS-285 Intended Application, Safety Certifications, Power Requirements, Specifications