PLUMBING PREPARATION (continued)
B
A
Figure 8 | Figure 9 |
Drain Plumbing
Dishwasher Connection Piece
If the dishwasher is to drain either directly into the household drain plumbing or through an air gap, install a dishwasher connection piece under the sink, as shown in Figure 8, letter A.
Installing an Air Gap
If local ordinances require an air gap, as shown in Figure 9, letter B, install it according to the manufacturer’s instructions.
Disposer
If a disposer is to be installed, as shown in Figure 10, letter C, install it according to the manufacturer’s instructions. Whether the disposer is newly installed or existing, remove the disposer’s dishwasher drain connection plug.
C
Figure 10
A |
B
Figure 11
DISHWASHER
PREPARATION
Dishwasher preparation involves four tasks:
•Installing the Mounting Brackets
•Removing the Toe Panel
•Installing the 90° elbow fitting
•Junction Box Preparation
Installing the Mounting Brackets
CAUTION: Before installing the supplied mounting brackets (letter E in the Materials Supplied section of this manual), decide which method of securing the dishwasher into its enclosure will be used. Once the mounting brackets are installed on the dishwasher, removing them is difficult and will damage the mounting brackets and the dishwasher.
The dishwasher can be secured into its enclosure in two ways:
1.Top Mount is used for countertops made of wood or other materials that can easily drilled. Orient the mounting brackets as shown in Figure 11, letter A, and position the two small tabs on the mounting brackets over the two slots on the dishwasher’s front corners. Push the mounting brackets down firmly to insert the tabs into the slots.
2.Side Mount is used for countertops made of marble, granite, or other very hard materials that cannot be easily drilled. Bend the mounting brackets along the small holes and in the same direction as the two small tabs. Orient the mounting brackets as shown in Figure 11, letter B, and position the two small tabs on the mounting brackets over the two slots on the dishwasher’s front corners. Push the mounting brackets down firmly to insert the tabs into the slots.
7