Note:
Parts included
Preparation
Countertop requirements
min.30"
(76,2cm)
Additional materials may be necessary for installation in solid surface countertops. Contact the countertop manufacturer.
1.Hold down brackets
2.Clamping screws, #10 32 x2 1/2" (63,8 mm) (4)
3.Sheet metal screws, #8 x 3/8" (9,5 mm) (4)
4.Washers (4)
5.Heat shield
_1/4" (6 mm)
2 1/2" (63.8mm)
Setback Distance
1" (25.4mm)
Flat Area
(25.4mm)
FlatArea
19 7/8 - 20" |
|
|
(505 - 508mm | 3/4 | - 28 7/8" |
|
| |
| (731 | - 734mm) |
Flat Area
1 1/4" (31.8mm),,_,
1" (25.4mm
After preparing cutout, remove shavings as they can affect the function of electrical components.
WARNING: To reduce the risk of ignition combustible materials surround the installed cooktop are not permitted.
Solid surface countertops often require special installations. For example, heat reflective tape and rounded corners may be necessary. Contact the countertop manufacturer for instructions specific to your countertop.
5
