Thermador CIT36XKB manual Induction Cooktops, Planning Information, Model Options, Warranty

MODEL OPTIONS

There are two sizes of induction cooktops to choose from — 30-inch and 36-inch. Models are available in our original black fi nish as well as our silver mirrored fi nish for those who want a bold, striking alternative that goes perfectly with stainless steel appliances. Be sure to reference the correct model information in this design guide.

INSTALLATION CONSIDERATIONS

The information in this design guide provides key features, product dimensions, cutouts and installation specifi cations. Before installing a Thermador Induction Cooktop, be sure to verify the cutout dimensions and electrical connections. Also, always consult with the installation manual packed with the product for complete details before installing.

Thermador Induction Cooktops may be installed above a Thermador Single Built-in Oven. A minimum 1" air gap must be maintained between the bottom of the cooktop and the top of the oven.

Thermador Cooktops may also be installed above a Thermador Warming Drawer to create a convenient cooking center. Refer to the warming drawer section for additional specifi cations.

Solid surface countertops often require special installation. For example, heat refl ective tape or rounded corners may be necessary. Contact the countertop manufacturer for instructions specifi c to your countertop.

We strongly recommend the installation of a Thermador Ventilation System with this induction cooktop. Refer to the ventilation section for specifi cations.

WARRANTY

Limited warranty parts and labor (2 year)

Limited warranty for glass ceramic surface/electronic elements and switches; Parts only (3rd to 5th year)

See page 308 for additional warranty details.

1.800.735.4328 THERMADOR.COM

	INDUCTION COOKTOPS			COOKTOPS
PLANNING INFORMATION
ELECTRICAL SPECIFICATIONS
Be sure your appliance is properly installed and grounded by a qualifi ed				—
technician. Installation, electrical connections and grounding must comply
				INDUCTION
with all applicable local codes.
All induction cooktops are dual rated, designed to be connected to either
240/208V AC, 60 Hz,	3-wire, single-phase power supply.
Install a suitable conduit box (not furnished). An appropriately-sized,
UL-listed conduit connector must be used to correctly attach the conduit to
the junction box.
MODEL		REQUIRED CIRCUIT BREAKER
		240V, 3-Wire, 60 Hz	208V, 3-Wire, 60 Hz
CIT36XKB		40 Amp	40 Amp
CIT365KB		50 Amp	50 Amp
CIT365KM		50 Amp	50 Amp
CIT365KBB		50 Amp	50 Amp
CIT304KB		40 Amp	40 Amp
CIT304KM		40 Amp	40 Amp
CIT304KBB		40 Amp	40 Amp

Product available 3rd Quarter 2012. For our current collection of Induction Cooktops, refer to Volume 1 of the Kitchen Design and Planning Guide or visit thermador.com or your local dealer for details.

IMPORTANT: Local Codes may vary; installation, electrical connections and grounding must comply with all applicable local codes. If required by the National Electrical Code (or Canadian Electrical Code), this appliance must be installed on a separate branch circuit.

3 1/8" max (79 mm) + Fitting/Conduit 0.9" (23 mm)	ELECTRICAL LOCATION
	The junction box must be located
12" approx. (300 mm)	within 3 feet (~900 mm) of the
	cooktop connection. It should be
Connection
(“J”) box	easily accessible for service purposes.
1" min (26 mm) air clearance
Conduit approx. 3 ft. ( 900 mm)

CABINET REQUIREMENTS

The distance from the top of the cooktop to the bottom of the cabinets above it must be A = 30" (762 mm) minimum. This distance can be reduced to A = 24" (610 mm) when the bottom of the wood or metal cabinet is protected by not less than 1/4" (6.35 mm) fl ame retardant millboard, covered by no. 28 steel sheet 0.015 (.4 mm) thick stainless steel, 0.024" (0.6 mm) aluminum,

or 0.020" (0.5 mm) thick copper, at a minimum. Verify that the cabinets above the cooktop are a maximum of B = 13" (330 mm) deep.

99