Thermador CIT36XKB manual COOKTOPS 36-INCHINDUCTION, Cooktops - Induction, Installation Options

INSTALLATION OPTIONS

INSTALLATION ABOVE A BUILT-IN OVEN OR WARMING DRAWER

Thermador Induction Cooktops may be installed above a Thermador Single Built-in Oven. A minimum 1" air gap must be maintained between the bottom of the cooktop and the top of the oven.

Thermador Cooktops may also be installed above a Thermador Warming Drawer to create a convenient cooking center. Refer to the warming drawer section for additional specifi cations.

IMPORTANT

We strongly recommend the installation of a Thermador Ventilation System with this induction cooktop.

Seal the surfaces of the cutout to make them heat resistant. This prevents the surfaces from expanding as a result of humidity.

Solid surface countertops often require special installation. For example, heat refl ective tape or rounded corners may be necessary. Contact the countertop manufacturer for instructions specifi c to your countertop.

WARNING

To reduce the risk of ignition of nearby combustible materials, install the countertop with a minimum distance of 2" (51 mm) from both side walls and the back wall.

HEAT SHIELD

The heat shield will require an additional 1" clearance below the cooktop. For safety reasons, the heat shield must be properly installed. This prevents components from overheating as a result of the recirculation of hot air from the cooktop. The heat shield is the same width as the cooktop. For shipping, it is screwed to the burner box. Once installed, the heat shield will be able to rotate freely, as shown in the illustration. Refer to the instructions packed with product for installation details.

heat shield

COOKTOPS 36-INCH INDUCTION

CIT365KB / CIT365KM / CIT365KBB

36-INCH COOKTOP AND CUTOUT DIMENSIONS

NOTE: The work surface should be horizontal and level. The stability of the countertop should be confi rmed even after making the cutout.

INSTALLATION ABOVE A THERMADOR BUILT-IN OVEN

Heat shield: Self positioning – 2 3/8" length,

Minimum required air clearance: 1" (26mm)

	4"	31/8" 43/16"
	(102mm)	(79mm)		(106mm)	COUNTERTOP
63/4"	COOKTOP				3"(76mm)
(172mm)
Fitting/	SUMP
Conduit
	23/4"	11/16"
	(70mm)	(27mm)
36"		OVEN		281/4"
(914mm)	24	7/16"		(718mm)	291/16"
					(738mm)
	(621mm)
			271/16"
			(687mm)
43/4"	TOE KICK
(121mm)

Note: Dimensions based on standard countertop height (36" with 43/4" toekick including base plate).

The built-in oven can be installed below the induction cooktop as long as there

is an air clearance of 1" between the bottom of the cooktop and the top of the oven.

Sump applies to 30-inch Wall Ovens only.

COOKTOPS — INDUCTION

1.800.735.4328 THERMADOR.COM 103