Setting up your Camera for Use

Your camera requires three “AAA” batteries. To inset the batteries in the camera:

1.Slide the battery bolt to open battery door.

2.Load three AAA batteries correctly as the polarity (+ and -) marked on the battery cover.

Note: When the camera is connected to the computer, you can’t take photos.

	3. Close battery door.	Warning:
	3. Close battery door.	1. To avoid loss of photos in the camera due to
		1. To avoid loss of photos in the camera due to
		power loss, please don’t open the battery
		compartment unless necessary.
		2. Please download photos to your PC as often as
		possible.
		3. If the camera is idle for a long period of time,
		please remove the batteries to avoid battery
		leakage and corrosion.

Install PhoTags Express software and Camera Driver

1.Insert the CD into your CD-Rom drive. Make sure that your camera is not connected to the computer.