HOODCONTROLBUTTONS

OFF

Pressing button once turns ventilator off and resets control.

FAN SPEED

Pressing button once, from an off state, turns the ventilator on low. Each successive press of the button increases the fan speed until high where the fan cycles back to the low speed.

•The LEDs above this button indicate the current fan speed. When the fan is on, the corresponding LED is illuminated.

1 – Low

2 – Medium

3 – High

DELAY SHUT OFF

•Press to turn fan on high for 10 minutes.

If the ventilator is off when the delay button is pressed, the ventilator will turn on to the high speed setting for 10 minutes. At the end of the cycle the ventilator will turn off.

If the ventilator is on when the delay button is pressed, the ventilator runs for 10 minutes at the current speed then turns off.

•During a timed period, the LED above the Delay Shut Off button is illuminated.

•To interrupt a timed period, press Fan Speed or Off button.

CLEAN FILTER REMINDER

After 40 hours of operation, the clean filter reminder LED above this button will illuminate indicating that the filters need to be cleaned. When this indicator illuminates, clean the filters as instructed on page 6. After cleaning, press this button for 3 seconds to reset the 40-hour period and turn the LED off.

LIGHT On/Dim/Off

This button controls the halogen lighting. The first press turns the lights on. A second press dims the lights. A third press turns the lights off.

HEAT LAMP (for Wall Hoods Only)

The buttons marked “L” and “R” independently control the left and right infrared heating lamps, turning the lights on or off.

HEAT SENSOR

Your hood is equipped with a heat sensor that will turn the blower to Low speed if excessive heat occurs above the cooking surfaces.

1 . If the blower is off – it turns the blower on to low speed.

2 . If the blower is already on any speed selection, no speed change will occur.

When the temperature level on the hood drops to normal, the blower will return to its original setting.

Over Temperature Condition - The high temperature sensor protects the hood from high temperatures which may damage components. The control is set to activate at 161º F (72º C) and reset at 140ºF (60º C). When activated, the ventilator will turn on low and the corresponding LED will blink, indicating an over temperature condition.

While the high temperature sensor is activated, the blower speed can be changed or turned off. If the blower is turned off, the corresponding LED will blink. Light controls will remain operational. When the control sensor reaches 140ºF (60º C), a reset will occur. During reset, the control will revert back to the operational state prior to the high temperature condition.

High Temperature Fault Condition - The circuit is equipped with an alarm indicating that the heat sensor protection is not working, due to a damaged sensor. In the case of this extreme condition, the three speed indicator LEDs will start blinking. All the controls will be operational except for the speed indicators.

PAGE 5

Page 4 Page 6
Page 5
Image 5
Thermador PH54ZS, PHI60ZS, PHI48ZS, PH48ZS, PH36ZS, PH42ZS Hoodcontrolbuttons, Light On/Dim/Off, Heat Lamp for Wall Hoods Only
Page 4 Page 6

PH54ZS, PH42ZS, PH36ZS, PH48ZS, PHI48ZS specifications

The Thermador PHI series presents a stunning lineup of professional-grade range hoods, including models PHI60ZS, PHI48ZS, PH48ZS, PH36ZS, and PH42ZS. These hoods not only elevate the aesthetic of any kitchen but also enhance the cooking experience with their powerful performance and advanced technologies.

One of the standout features of the Thermador PHI series is its impressive ventilation capabilities. Equipped with powerful, efficient motors, these hoods offer multiple fan speeds, ensuring that smoke, steam, and odors are effectively captured and eliminated from the kitchen environment. The high-performance blower is designed to operate quietly, allowing for a peaceful cooking atmosphere without compromising on efficiency.

The design of the PHI series is both functional and elegant. Featuring a sleek, stainless steel construction, these hoods seamlessly integrate with various kitchen styles, from classic to contemporary. The professional design is further enhanced by the unique, illuminated controls which make adjusting fan speeds and lighting a breeze, even when hands are full with culinary preparations.

Another key technology featured in the Thermador PHI series is the Ducted and Ductless installation options. This versatility allows homeowners to adapt the hood to their existing kitchen layout, whether they are working with traditional ducting or prefer the convenience of ductless installation with a recirculating feature.

Lighting plays a crucial role in any kitchen, and the PHI series does not disappoint. The hoods come equipped with energy-efficient LED lighting that brightens the cooking surface, providing ample visibility for food preparation and cooking tasks.

The Thermador PHI series also incorporates advanced features such as a powerful grease filter system. These filters are designed to capture grease and particulates, ensuring cleaner air and reducing the risk of grease buildup within the kitchen. They are reusable and easily washable, adding to the convenience of maintaining a healthy cooking environment.

In addition, the hoods feature a sleek, customizable design that allows for various configurations, making them adaptable to any kitchen size or style. Whether you choose the 60-inch PHI60ZS or the more compact PH36ZS, each model combines performance, style, and advanced technology for an unparalleled cooking experience.

The Thermador PHI series range hoods stand out not only for their effective ventilation but also for their sophisticated design and versatile installation options, making them a prime choice for any culinary enthusiast looking to enhance their kitchen space.
Top Page Image Contents