CV-M4+/M4+CL, CV-M7+/M7+CL

9.2. Specification table

 

 

 

 

Specifications

CV-M4+/CV-M4+CL

 

CV-M7+/CV-M7+CL

Scanning system

Progressive 1060 lines 24 frames/sec.

Pixel clock

40.49 MHz

 

40.49 MHz

Line frequency

25.43 kHz (1592 pixel clock/line)

 

25.43 kHz (1592 pixel clock/line)

Line freq. with V binnig

25.11 kHz (1752 pixel clock/line)

 

-

Frame rate for full frame

24 frames/sec. (1060 lines/frame)

 

24 frames/sec. (1060 lines/frame)

Frame rate for V binning

44 frames/sec. (565 lines/frame)

 

-

CCD sensor

2/3” progressive scan monochrome

 

2/3” progressive scan RGB primary color

 

IT CCD (ICX285AL)

 

(Bayer filter) IT CCD (ICX285AQ)

Sensing area

8.9 (h) x 6.6 (v) mm

Cell size

6.45 (h) x 6.45 (v) m

Effective pixels

1392 (h) x 1040 (v)

Pixels in video output

 

 

 

Full

1380 (h) x 1030 (v) 24 frames /sec.

 

1380 (h) x 1030 (v) 24 frames /sec.

V binning

1380 (h) x 515 (v) 44 frames/sec.

 

-

1/2 partial

1380 (h) x 512 (v) 44 frames/sec.

 

1380 (h) x 512 (v) 44 frames/sec.

1/4 partial

1380 (h) x 256 (v) 70 frames/sec.

 

1380 (h) x 256 (v) 70 frames/sec.

1/8 partial

1380 (h) x 128 (v) 102 frames/sec.

 

1380 (h) x 128 (v) 102 frames/sec.

Sensitivity on sensor

0.1 Lux (Max. gain, 50% video)

 

0.1 Lux (Max. gain, 50% video)

S/N ratio

>57 dB

 

>57 dB

Video A/D conversion

 

10

bit

Video output digital

8 bit in LVDS (EIA 644). 10 bit in Camera Link. (CL versions)

Video output analogue

0.7 Vpp, 75 (For test only)

Gamma

 

1.0

Gain

Manual

Gain range

-3 to +12 dB

Synchronization

Int. X-tal. Ext. random trigger

Sync. output *)

Composite 4 Vpp from 75

Trigger input TTL *)

4 V ±2 V

EEN output *)

4 Vpp from 75

Pixel clock output

LVDS or Camera Link

LEN output

LVDS or Camera Link

FEN output

LVDS or Camera Link

Trigger input *)

TTL, LVDS or Camera Link

Multiple exposure *)

TTL, LVDS or Camera Link

Trigger modes

Continuous, Edge pre-select, Pulse width control, Frame delay, Reset Continuous

 

Trigger

Trigger input (Edge pre-s)

>2 H to < 4000 H. (H synchronous H a-synchronous accumulation)

Shutter speed (fixed)

1/24, 1/50, 1/100, 1/200, 1/400, 1/800, 1/1500, 1/3000, 1/5000, 1/10,000 s

Pulse width control

2 H to . (80 sec. to ) <2 second is recommended

Frame-delay readout

Fixed shutter speeds. Delay 3 frames

Smearless readout

Edge pre-select, PWC and frame delay

Multiple exposure

6 fixed exposures in frame-delay readout.

Interval between exp.

Fixed shutter time + 1H (40 sec.)

Switches on rear

Shutter, trigger, scanning, smearless, RS 232C control

Functions controlled by

Shutter, Trigger, Scanning, Readout, Trigger input, Select/polarity, LEN/FEN/EEN

RS 232C

polarity, Video level, Set-up level and Gain

Operating temperature

-5°C to +45°C

Humidity

20 – 80% non-condensing

Storage

-25°C to 60°C 20 to 90% non-condensing

Power

12V DC ± 10%. 3.3 W

Lens mount

C-mount

Dimensions

40 x 50 x 90 mm (HxWxD)

Weight

 

250g

*) Alternative inputs or outputs

- 27 -

Page 28
Image 28
JAI M7+ CL, CV-M4+, CV-M7+, M4+ CL operation manual Specification table, Specifications