Thermador SGSL, SGSX installation manual Installation, Before You Begin

Models: SGSX SGSL SGS

1 36
Download 36 pages 9.51 Kb
Page 6
Image 6

Installation

Before You Begin

Tools and Parts Needed

1.Phillips Head Screwdriver

2.Drill with 1/4” (6.5mm) bit

3.Tape Measure

4.Teflon Tape (Gas Rated)

Parts Included

1.Foam tape

2.Hold down brackets (4)

3.Screws, #10-32 x 2 1/2” (63.8mm) (4)

4.Sheet Metal Screws, #8 x 3/8” (9.5mm) (4)

5.Washers (4)

6.Burner Grates (3)

7.Burner Caps 36” models: (5)

30” models: (4) or (5)

8.Pressure Regulator

If parts are missing or damaged, call the number or write to the address listed inside the back cover.

General Information

Overall Dimensions

 

30” Models

36” Models

 

 

 

 

 

 

Width

31” (788 mm)

37” (940 mm)

(Side to Side)

 

 

Depth

21 1/4” (540

21 1/4” (540

(Front to Back)

mm)

mm)

Height

3 13/16 (97 mm)

3 13/16 (97 mm)

(Top to Bottom)

 

 

 

 

 

*NOTE: These are overall dimensions NOT cutout dimensions.

Preparation

Electrical Requirements

This appliances requires a 60 Hz, 15 Amp, 120 VAC connection. Plan the installation so that the power connection is accessible from the front of the cabinet.

Gas Requirements

Supply Pressure:

Natural Gas - 7 inches water column (14.9 Millibars) minimum.

Propane Gas -11 inches water column (27.4 Millibars) minimum.

The propane gas tank must be equipped with its own high pressure regulator in addition to the pressure regulator supplied with this unit. The cooktop is shipped from the factory for use with natural gas. For use with LP conversion kit – Model SNLPKITF, must be purchased separately. A qualified technician or installer must do the conversion.

Cabinet Requirements

Dimension requirements in Figures 1 and 2 are for combustible surfaces. When the surface is protected by a material listed by UL as a Floor Protector and Wall Shield covered with not less than No. 28 MSG sheet metal 0.015 inch (0.38mm) stainless steel, 0.024 inch (0.6mm) aluminum or copper, it is considered noncombustible and some dimensions may be reduced. For a noncombustible surface over the cooktop, the minimum clearance is 24" (61cm) rather than 30" (76cm).

Instructions are based on standard American cabinets 36" high (91cm) x 24" deep (61cm) with a 25" (63cm) countertop.

Provide approximately a 10 square inch opening

(65cm2) in the toe kick area or other cabinet area for adequate air inlet to the cabinet if installed with a downdraft.

The maximum depth of cabinet installed above cooktop is 13” (33cm).

English 3

Page 6
Image 6
Thermador SGSL, SGSX installation manual Installation, Before You Begin

SGSX, SGSL, SGS specifications

The Thermador SGS, SGSL, and SGSX series represent some of the most advanced cooking technologies offered by Thermador, a brand synonymous with luxury kitchen appliances. Each model is designed to transform the cooking experience through innovative features, superior performance, and distinctive aesthetics.

One of the standout features of the Thermador SGS series is the powerful gas burners. These burners deliver high BTUs, which allow for rapid boiling, searing, and simmering. The precision of flame control enhances the cook's ability to fine-tune the heat, making it ideal for both delicate sauces and hearty stews. Additionally, the professional-style burners feature an extra-large design, providing ample surface area for larger pots and pans.

The SGSL model introduces significant advancements in safety and convenience with its innovative Star Burners. These unique burners have a star-shaped design that increases the cooking surface area while minimizing cold spots. This design ensures even heat distribution, which is essential for consistent cooking results. Furthermore, the SGSL series includes a robust automatic re-ignition feature, which reignites the flame instantly if it goes out, providing peace of mind while cooking.

The SGSX series stands out for its sleek and modern aesthetics, integrating seamlessly into upscale kitchen designs. The stainless steel finish is both stylish and easy to maintain, ensuring the appliance remains a focal point in the kitchen while withstanding regular use. Additionally, the SGSX includes features such as a continuous grate system, allowing for easy maneuvering of pots and pans across the entire cooking surface.

In all three models, technology plays a pivotal role. The intuitive controls are designed for ease of use, enabling cooks at any skill level to navigate the various settings with minimal effort. Moreover, a notable characteristic of Thermador appliances is their commitment to energy efficiency without compromising performance, making these cooktops both environmentally friendly and cost-effective in the long run.

The Thermador SGS, SGSL, and SGSX series exemplify a perfect blend of modern technology, innovative design, and professional-grade performance. These cooktops cater to culinary enthusiasts keen on exploring their passions while providing essential features that enhance safety and convenience in the kitchen. With their commitment to excellence, Thermador remains a top choice for those who appreciate the art of cooking. Whether searing steaks, simmering sauces, or simply boiling water, these cooktops are equipped to handle it all with grace and efficiency.