![](/images/new-backgrounds/1076776/7677621x1.webp)
Final Check
Check operation of electric igniters. Check flame | Yellow Flames: |
characteristics. Flame should be blue with no yellow tip. | Further adjustment is required. |
| Yellow Tips on Outer Cones: |
| Normal for LP Gas. |
| Soft Blue Flames: |
| Normal for Natural Gas. |
| If the flame is completely or |
| mostly yellow, verify that the regulator is set for the |
| correct fuel. After adjustment, retest. |
| Some yellow streaking is normal during the initial start- |
| up. Allow unit to operate |
| before making adjustments. |
| Figure 11: Checking Flame Characteristics |
Service
Before Calling Service
If the ignitors do not spark or the “on” indicator lights do not glow, check the power source to see if a fuse has blown or if the circuit breaker has tripped.
Refer to the Warranty in the Use and Care Manual. See Use and Care manual for troubleshooting information.
Product Data Plate
The data plate shows the model and FD (product's unique identifier for customer service) number of your cooktop. It is located on the underside of the
Data Plate
Figure 12: Data Plate Location
Keep your invoice or escrow papers for warranty validation if service is needed.
English 8