Thermaltake W0330RU Installation Steps, Case manual

PurepowerTM Series

3.Power Connector Introduction

PurepowerTM Series

4. Installation Steps

Cable

P/N Model

W0330 550W

W0329 450W

W0328 350W

20+4pin Main	4pin +12V CPU	SATA	Peripheral	Floppy	6pin PCI-E
Connector	Connector	Connector	Connector	Connector	Connector
1	1	4	6	2	1
1	1	2	5	1	1
1	1	2	5	1	0

Note: Make sure that your system is turned off and unplugged. Disconnect the AC power cord from your old power supply.

1.	Open your computer case; please refer to the direction in your
	case manual.
2.	Install the PSU into the case with the four screws provided.
3.	Connect the 24 pin Main Power Connector to your

MODELS	Connector Type
W0330	20+4pin
W0329
W0328	ATX 12V 4pin
W0330
W0329	Molex & FDD
W0328
W0330	SATA
W0329

W0328	SATA
W0330	PCI-E 6pin
W0329

Connectors & Cable length

1x 24pin Main connector (400mm)

1 x ATX 12V 4pin connector

(400mm)

3 x Peripheral, 1 x FDD connectors (400mm + 150mm + 150mm + 150mm)

3 x Peripheral, 1 x FDD connectors

(400mm + 150mm + 150mm + 150mm)

3 x Peripheral, 1 x FDD connectors

(400mm + 150mm + 150mm + 150mm)

2 x Peripheral connectors

(400mm + 150mm)

3 x Peripheral connectors

(400mm + 150mm + 150mm)

2 x Peripheral, 1 x FDD connectors

(400mm + 150mm + 150mm)

2 x SATA connectors

(400mm +150mm)

2 x SATA connectors

(400mm +150mm)

2 x SATA connectors

(400mm + 150mm)

1 x 6pin PCI-E connectors

(400mm)

motherboard and peripheral. If your motherboard uses a 20-pin

connector, detach the 4-pin attachment on the 24-pin connector.

Note: The detachable 4-pin section cannot be used in place of a 4-pin +12V

connector.

4.Connect the 8-pin or 4-pin connector for the CPUs.

5.Connect other peripheral power connectors to devices such as

hard drives, optical drives, etc.

6.Close your computer case and connect the AC power cord to the power supply AC inlet.

03 04