4.You will be prompted for a passkey and will see a Bluetooth Passkey dialog box. Enter a passkey of your own choosing (of 1-9 digits) using the mobile device’s on-screen keyboard and tap OK. Then, type the same passkey number on the Stowaway Sierra keyboard. When finished, press the <Enter> key.

NOTE: The passkey must contain only digits, for example 111.

5.If the passkey is not entered correctly, the connection will fail. In this case you will need to repeat steps 1-4 from above.

NOTE: Please, make sure that the passkey is entered on-screen first, tap OK and then follow with the passkey on the keyboard. When finished, press the <Enter> key on the keyboard.

6.The keyboard is now paired and available for use. If the keyboard is closed, the mobile device is turned off or either is idle too long the connection will be broken. To reconnect, make sure both devices are powered on and within range, then press a key to reestablish the connection. If reconnection fails tap the Connect button on the BT status page. NOTE: It may take 2-3 seconds for the connection to be reestablished after a key press.

Stowaway Sierra Owner’s Manual for Windows Mobile

Page 7