Exterior Installation…
This TIC AMP10 exterior receiver amplifier can connect to and operate
three different sound sources at any one time.
Step by step…
1.Installation of your amplifier should consider a safe, off the ground, dust free position not too far from a mains outlet and not exposed to excess water, dust, particulate matter or human traffic conditions
2.Connect any
3.Connect any input devices such as your CD/ MP3/Ipod players etc. to your AMP10 receiver amplifier
4.Connect the rear 12v power cable to your AMP10 and then tighten the connection securely.
5.Connect the rear cable to the supplied 12v transformer.
6.Connect the power mains cable to the 12v transformer and then to the wall mains 120/110v. Please be especially cautious with the integrity of this connection to dangerous mains power. Ensure its in a safe and dry environment.
7.Switch the unit “on” using the rear silicone material clearcovered rocker switch
8.Switch the unit “on” using the front fascia on/off/ pause push switch
9.Choose your listening “Mode”. Note: the unit is factory preset in Radio mode to begin initially
10.Select desired input device CD, MP3 or radio/ mic’s input/ output
11.Test the unit using as many “modes” of operation as you can to ensure a correct trouble free exterior installation
Sit back & Enjoy!
TIC Corporation wishes you many years of pleasure from your new TIC Corporation exterior audio product
