Note: It is possible for your speakers to be “out of phase” where switching on the remote switches on one speaker but not the other. In this case completely power down the system removing any batteries in the speakers, then power up and switch on again, regaining balance.
Exterior Installation…
Some general notes and tips for when you install your new TIC Wireless Outdoor Rock Speakers in an Exterior environment.
1.Don’t forget to test your new product prior to exterior installation.
2.Carefully unpack your new TIC WRS010 outdoor wireless rock speakers and inspect all components as previously described.
3.Carefully connect your “Mini Rock” broadcast transmitter to a working sound source. Attach any output devices, CD’s, MP3’s, Ipod, receiver amplifier etc. Ensure it has power and is switched “On”. (Green LED)
4.Locate your new exterior rock speakers using the previously described placement techniques; ensure no architectural or other broadcast signal obstructions.
5.Power up your speakers ensuring the Green signal light is lit.
6.Using your remote control, switch “On”, then adjust the volume of your outdoor speakers.
7.Be aware of the Red LED light flashing when battery power is low.
8
