pressing and holding STOP/RESET.
You may leave CHRO mode while the Chronograph is run- ning; it will continue to run in the background, indicated by
the 
icon on the display when in TIME mode.
Lap/Split Timing
Press START/SPLIT each time you pass a segment marker (like trail head marker) to complete the timing of the previous lap or segment and begin timing a new one. The lap and split times for the segment just completed will be displayed for ten seconds (it will still be timing the new segment in the background, indicated by the flashing 
symbol on the display). If you wish to return to the running Chronograph immediately, press MODE to dismiss the previous lap time data.
Changing the Display Format
You have the option of viewing either the lap or split time in the large digits in the center of the watch display. The display format can be changed at any time, though the method changes based on whether or not laps have been taken. The word “LAP” will appear on the display to inform you where the lap time is displayed.
If no laps have yet been taken:
Press SET. “FORMAT” will appear on the display, followed by the current configuration, which will be flashing. Press START/SPLIT or STOP/RESET to select the desired format and then press SET to save the setting and return to the Chronograph display.
36 | 37 |
