Timex T020 manual Setting the Alarm Time, Activating The Alarm and Snooze Functions

Setting the Alarm Time

1.When the correct time, month, and date are showing on the display press the MODE button once to change the display from current time to alarm time. The initial default alarm setting is 12:00 (AM). The “AL” indicator appears between the Hour and Minute digits to confirm that you are in the alarm-setting mode.

2.While the display is in the alarm-setting mode press and hold the MODE button for two seconds until the Alarm Hour digits begin flashing, then press either the or buttons to set the display to the desired wake-up hour, AM or PM. If the PM indicator does not appear the hour displayed is AM.

3.When the desired wake up hour appears press the MODE button once to start the Minute digits flashing, then press either the or buttons to set the display to the desired wake-up minute.

4.When the desired wake-up time appears on the display you may press the MODE button once more to return to the current time display. After 15 seconds the display returns to the current time mode automatically.

5.If you wish to reconfirm the wake-up time just press the MODE button once. The display will change from current time to alarm time. After 15 seconds the display changes back to current time automatically.

Activating The Alarm and Snooze Functions

To turn the alarm ‘On’ press the Snooze/Alarm On/Off button on the front panel once. The Alarm On indicator appears in the display.

To activate the Snooze function press the Snooze/Alarm On/Off button once more. The Snooze indicator appears in the center of the display.

At the selected wake-up time the alarm turns on automatically. The alarm begins with a single ‘beep’ and then the frequency of the ‘beeps’ increases. The alarm continues for two minutes, then shuts off automatically and resets itself for the same time on the following day.

To stop the alarm sooner, press any button on the front panel. The alarm stops immediately and resets itself for the same time on the following day.

Snooze Function

If you activated the Snooze function and the Snooze indicator appears in the display after the alarm turns on you may press the Snooze Bar for an extra 5 minutes sleep. The alarm will stop and then start again 5 minutes later. You may repeat the Snooze operation up to 8 times, but after 8 times the alarm resets itself for the following day. The Snooze indicator flashes in the display during Snooze operation.

Deactivating The Alarm and Snooze Functions

To deactivate the Alarm and Snooze functions, press the Snooze/Alarm On/Off button until both the Alarm indicator and Snooze indicator disappear from the display.