ALARM AND CHIME
A. Press MODE to select ALARM
B. Press SET to select Time Zone 1 or 2
C.Press START/SPLIT to change.
D.Press MODE to select HOURS. Digits will flash.
E.Press START/SPLIT to advance. Go through 12 hours for AM or PM
F.Press MODE to select TENS of MINUTES.
G.Press START/SPLIT to advance. Repeat for MINUTES, Time Zone 1 or 2.
H.Press SET when done.
I.In ALARM Mode, press START/SPLIT repeatedly to turn ALARM and CHIME modes on or off.
When alarm time is indicated in appropriate time zone, watch will beep for 20 seconds, or until a watch button is pushed. Alarm will repeat every 24 hours until deactivated.
COUNTDOWN TIMER
A.Press MODE to select TIMER
B.Press SET to select TENS of HOURS. Digits will flash.
C.Press START/SPLIT to advance.
D.Press MODE to select HOURS.
E.Repeat to set TENS of MINUTES, MINUTES, TENS of SECONDS, and SECONDS
F.Press SET when done.
G.Press START/SPLIT to start timer.
H.Press STOP/RESET to pause, START/SPLIT to resume.
I.Press STOP/RESET again to reset.
Watch will beep when countdown ends.
TIME ZONE
A.Press MODE to select TIME ZONE 2.
B.Press and hold SET to set time. HOURS digits will flash.
C.Press START/SPLIT to advance. Go through 12 hours for AM or PM.
D.Press MODE to select MONTH, DATE, 12- or
E.Press SET when done
F.Press START/SPLIT to view TIME ZONE 2.
INDIGLO®
A.Press INDIGLO to illuminate watch face. Patented (U.S. pat. 4,527,096 and 4,775,964) elec- troluminescent technology used in the INDIGLO®
B.Press and hold INDIGLO for three seconds (beep will sound) to activate or
NIGHT-MODE®
C.While in
|
| WATER RESISTANCE |
| ||
If your watch is | ) is indicated. |
| |||
|
|
|
|
| |
|
| p.s.i.a.* Water Pressure Below Surface |
| ||
|
|
| |||
| 30m/98ft |
|
| 60 |
|
| 50m/164ft |
|
| 86 |
|
| 100m/328ft |
|
| 160 |
|
| 200m/656ft |
|
| 284 |
|
|
|
|
|
*pounds per square inch absolute
WARNING: TO MAINTAIN
1.Watch is
2.Watch is not a diver watch and should not be used for diving.
3.Rinse watch with fresh water after exposure to salt water.