TMC ET4300 manual Using Station Names

You may follow the above steps at any time if you wish to change a telephone’s station number.

Note: If you are connecting your tele- phone for the first time, the telephone automatically starts at the station assignment screen, so you begin with step #3.

8

Press PROGRAM to exit.

4

Press the soft key under CHANGE repeatedly, until the desired station number is displayed.

The choices are Station #11 through Station #26.

3

Press the soft key under NEXT.

- The display will show the currently assigned station number.

2

Installing Your System

Assigning Station Numbers

Each station must be assigned a different station number.

To assign a station a number:

1 Press PROGRAM.

- The display will read “Program...”

Until a telephone is assigned a station number, the telephone will not operate, and the display will read “Station #??”. To assign this telephone a station number, simply press the soft key under CHANGE repeatedly until the desired station number is displayed.

It is important to connect the telephone to the telephone lines before pressing CHANGE, so that the phone can check other existing sta- tions in the system, and avoid offering you a duplicate station assignment.

Note: One phone in the system must be set as Station #11 in order for all the system features, such as shared directory dial, to function.

Using Station Names

If you wish, you may also assign your station a name (See page 57). Then, people will see your station’s name when you call them on the inter- com.