TOA Electronics 1000 Series Rear Panel, AC Fuse Holder, Fuse rating, Output Screw Terminal

Rear Panel

AC Fuse Holder

When replacing, be sure to use the fuse of specified rating and type to avoid the possibility of fire.

Fuse rating

220-240V version 250V T80mA

120V version 250V 0.2A

AC Power Cord

Ground Screw Terminal

Hum can result from a ground loop to be formed when the E-1231 is connected to other equipment. In such cases, cut the loop by removing a short piece, which should usually be mounted to the terminal.

Output Screw Terminal

The output terminal is balanced and 600 ohms in output impedance. Place the supplied short piece between E and C to convert to unbalanced type.

Input Screw Terminal

The input terminal is balanced and 10k ohms in input impedance. Place the supplied short piece between E and C to convert to unbalanced type.

— 5 —