TOA Electronics BA-800 manual BA-823 Front View Power Switch

[BA-823]< Front View >

Power Switch
Press this switch	to turn power ON. To turn power OFF, press this switch	again.

Power Indicator (Green)

Lights when the power is switched ON, and goes out when switched OFF.

Play Button

Press this button when playing back a tape. For details, refer to "Tape Playback" on p.17.

Stop Button

Press this button to stop the tape run.

Tape Travel Indicator (Green)

The indicator of a cassette player unit in operation lights. It flashes when the cassette player unit fails. Refer to "Fault indication" on p.26.

Eject Button

Press this button to eject the tape.

Blank Skip Switch

Set this switch to ON to use the "blank skip" function. Set it to OFF when not using the function. Refer to p.26 for this function.

Track Sequence Selection Switch

Selects tape playback order. For details, refer to p.20 "Track Sequence Selection".

Auto-Reverse Cassette Player Unit (CU-800)

Cassette Tape Receptacle

Dolby NR Switch (OFF/ON)

Set this switch to ON when playing a tape recorded with Dolby B-type NR.

Tape Volume Control

Microphone Volume Control

Make sure to set this control to zero when no microphone is connected to the BA-823.

Signal Indicator (Green)

Lights green when a signal is transmitted to the speaker output terminal. Refer to p.19.

Peak Indicator (Red)

Lights red when the output to the speaker approaches a clipping level. If steadily lit, turn down the volume. Also refer to p.19.

— 10 —