TOA Electronics BA-800 Alternate A-A-B-BPlayback, following sequence, Alternate A-B-A-BPlayback

5.2.Track Sequence Selection [BA-800, BA-806 and BA-823]

When both cassette player units (TAPE 1 and 2) are used, the tapes can be played back in order of side A-A-B-Bor A-B-A-B, which is selectable by means of the track sequence selection switch.

(1) Alternate A-A-B-B Playback

With the track sequence switch set to A-A-B-B position, both cassette player units first play back side A of their

respective tapes, and then side B, starting with TAPE 1. This is repeated between both cassette player units in the

following sequence:

START
Side A of TAPE 1	Side A of TAPE 2
Side B of TAPE 1	Side B of TAPE 2

(2) Alternate A-B-A-B Playback

If the track sequence selection switch is set to A-B-A-B position, both cassette player units alternately play back both sides (A and B) of their respective tapes before they are switched to each other.

[Note]: (1) Side A of the tape mentioned above refers to the side to play first. Therefore, it is not the same as

that which is shown on the tape.

(2)Be sure to set the link switch to OFF when using a BA-800 (BA-806 or BA-823) individually. If set to ON, the tape stops after TAPE 2 playback is finished.

— 20 —