TOA Electronics F-1000B Installation, Using the Supplied Brackets, Speaker Cable Connections

8. INSTALLATION

8.1. Using the Supplied Brackets

The speaker system is supplied with the following brackets. Use these brackets properly depending on the installation location and intended application.

[Speaker bracket] [Joint bracket] [Wall bracket]

30º

8.1.1. When using only the supplied brackets

Installation	Application	Speaker bracket	Joint bracket	Wall bracket	Page
Location
	When horizontal and vertical				P.	8
Wall	angle adjustability is desired.
	When close wall surface				P.	9
	mounting is desired*.
Ceiling	Vertical speaker mounting*				P. 10
Speaker Stand	Mounting to the optional				P. 12
(Option)	ST-16A Speaker Stand

* Speaker coverage angles can only be adjusted in the vertical direction.

8.1.2. When using both the supplied and optional mounting brackets

Installation	Application	Option	Speaker bracket	Joint bracket	Wall bracket	Page
Location
	Horizontal speaker	HY-CM10B or				P. 11
	mounting	HY-CM20W
Ceiling
	Suspended speaker	HY-CL10B				P. 11
	cluster mounting*
Pole	Mounting to a pole	YS-60B				P. 13
Partition	Mounting to a	HY-BH10B				P. 14
board	partition board

* Speaker coverage angles can only be adjusted in the vertical direction.

8.2. Speaker Cable Connections

[Input terminal polarity]

Sperker unit (rear)

Input terminal

(–)	(+)
BLACK	RED

[Stripped conductor of cable]

10 mm

7