
7. MATCHING TRANSFORMER INSTALLATION
An optional
Enclosure cover mounting screw (13 pieces)
1
Cover
Disconnect by widening the lock tab
3
Red White
4
2
Connection tab
Transformer mounting screw
Step 1. Remove the 13 enclosure cover fixing screws to detach the cover.
Step 2. Remove the two screws located inside an enclosure. Using the removed two screws, mount the MT- S0601 transformer so that its connection tab is facing the front of the enclosure.
Step 3. Detach the woofer's lead wire junction connector, and connect it to the
Step 4. Connect the speaker input cable to the desired impedance tap.
Step 5. Replace the enclosure cover.
Step 6. Choose an appropriate impedance indication |
|
label from those supplied with the | Nameplate |
and affix it over the | 6 |
the selected impedance. |
Indication label
Impedance label sheet (supplied with
9