11. Specifications
Inputs | Two electronically balanced. u |
Impedance | > 10k ohms. |
CMRR | >65dB 50Hz - 10kHz. |
Outputs | Six electronically balanced. u |
Source Imp | < 60ohms. |
Min. Load | 600ohm. |
Max. Level | +20dBm into 600 ohm load. |
Frequency Resp. | ±0.5dB 20Hz - 20kHz. |
Dynamic Range | >110dB 20Hz |
Distortion | < 0.02% @ 1kHz, +18dBm. |
Maximum Delay | 650 mS. (Increment 2.6 µS) |
Output gain | adjustable +15dB to |
Input gain | Adjustable +6dB to |
Parametric Equalisation |
|
Filters | 5 Sections per output |
Filter gain | +15dB to |
Centre frequency | 20Hz - 20kHz, 1/36 octave steps. (368 positions) |
Filter Q / BW | 0.4 to 128 / 2.5 to 0.008 |
(Sections switched to shelving response) | |
Low frequency | 20Hz - 1kHz |
High frequency | 1kHz - 20kHz |
Shelf gains | ±15dB in 0.1dB steps. |
High and Low pass Filters |
|
Filters | 1 of each per output. |
Frequency (HPF) | 10Hz - 16kHz, 1/36 octave steps. |
Frequency (LPF) | 60Hz - 22kHz, 1/36 octave steps. |
Response | Bessel / Butterworth 12/18/24dB per octave and |
| |
Limiters |
|
Threshold | +22dBu to |
Attack time | 0.3 to 90 milliseconds. |
Release time | 4, 8, 16 or 32 times the attack time. |
Display | 2 x 20 character backlit LCD. |
Input meter | 2 x 3 point, |
Output meter | 6 x 3 point, |
Connectors |
|
Inputs | 3 pin female XLR. |
Outputs | 3 pin male XLR. |
External | 9 pin DEE connector (RS232) |
RS485 | 3 pin male XLR (out.) 3 pin male XLR (in.) |
Power | 3 pin IEC. |
Power | 60 to 250V ±15% @ 50/60Hz. |
Consumption | < 20 watts. |
Weight | 3.5kg. Net (4.8kg. Shipping) |
Size | 1.75"(1U) * 19" * 11.8" (44 * 482 * 300mm) excluding |
| connectors. |
Optional Interfaces | Radio link. |
Options | u = Transformers available. |
Due to continuing product improvement the above specifications are subject to change.
30