6.4. Menu Selections
The following menu selections are available. To access menus, see instructions under preliminary
Xover Sub-Menu:
Load a Xover: Loads a
Design a Xover:
Store a Xover: Stores all output settings as a defined crossover.
Erase a Xover Mem: Erases a Xover from the list
Input Set-up Sub-Menu:
Allows ganging of inputs.
Security
options are available: changes only, changes + view, changes + mutes, everything.
Caution: Do not enter this menu option before reading and understanding the instructions in section 9.4, Security
System Sub-Menu:
System Status: Displays unit information including software version and temperature.
LCD Contrast: Adjusts LCD contrast.
LED Brightness: Adjusts LED brightness.
Temperature Alarm: Sets a temperature warning value in Centigrade.
Output Meters: Selects output meters to be pre or post mute.
Filter Q or BW: Selects whether Q or bandwidth is displayed in the parametric screens.
Delay Time/Distance: Selects whether delay is set in time in ms or distance in metres.
Interface Sub-Menu:
External Mode: Selects baud rate.
AES / EBU Sub-Menu:
Routing options: Selects various routing options if installed.
AES diagnostics: Shows the complete status of the input AES signal. Available only if the AES option is fitted.
(For more
13