Booklet_TJK-471_ENG:Salton Booklet 5/5/09 9:25 AM Page 4
6.If you want to use the Kettle again, allow the thermal safety switch to cool down for 15 – 20 seconds then depress the On/Off Switch to the ‘On’ position. If the On/Off Switch does not remain in the ‘On’ position, the Water is hot enough to use without reheating.
7.Unplug cord from wall outlet before lifting Kettle from Power Base. Grip the Kettle by the Handle only, as the surface and lid will be hot.
8.Return the Kettle to the Power Base or place on a heat resistant surface after use.
9.If the Kettle is accidently switched on when empty, the thermostat will automatically shut it off to prevent the Kettle from overheating. If this situation occurs, unplug the Power Base and let the Kettle cool before refilling.
10.It is recommended that the power cord be disconnected from the wall outlet when not in use. DO NOT attempt to connect any other appliance to the Power Base or tamper with the connector in any way.
4
