Booklet Eng Page 6
1.Place the Slow Cooker on a dry level surface. Add recipe ingredients to the Ceramic Casserole and cover with Lid. Place Ceramic Casserole in Slow Cooker base.
2.Plug unit into the wall outlet. The digital display will flash “- - -
3.Press the Temperature Button to select Low, High or Warm. (Press once for High, twice for Low, 3 times for Warm and 4 times for Stand Time.) The default setting of 6 hours (6:00) will be shown in the Digital Display if you have selected Low, High or Warm. Nothing will be shown in
the Digital Display if you have chosen “Stand Time”. After 3 seconds the Indicator Light will illuminate beside High, Low or Warm, depending on your selected setting.
4.Set the required amount of time by pressing the “Cook Time” Button. Each time you press the Cook Time Button the time will increase
by 30 minutes, to a maximum of 10 hours. If you don’t press the Cook Time Button for 3 seconds the cooking time will be the time showing in the Display Window.
NOTE: If you would prefer less cooking time than the default setting of 6 hours, continue to press the Cook Time Button past 10 hours and the Cook Time will display 30 minutes. Press to increase the time by 30 minute increments.
5.Once the Cooking Time is finished, the unit will switch to “Stand Time” mode for 10 minutes. The Digital Display will countdown the 10 minute Stand Time then will automatically switch to Warm. The default time of the Warm cycle is 10 hours.
6.Once the 10 hours has elapsed, the slow cooker automatically switches to Stand Time. The indicator lights will go out and the Digital Display shows
NOTE: To stop heating during the cooking process, press the Temperature Button until the remaining cooking time blinks in the Digital Display and the Indicator Light goes out. Wait 5 seconds and the unit will switch
to the
6
