Toastmaster 1439, 1427 Never clean the shortening when it is hot Let the shortening, followed

COUNTERTOP FRYERS SECTION 3 - OPERATION

G.Cleaning

1.To Prolong Fat Life Strain the Shortening and Clean the Shortening Container (vessel).

Your Toastmaster fry kettle and the shortening used in it will give longer, more profitable service if the following instructions are observed.

a.Turn the thermostat dial to OFF position.

b.Turn power switch OFF.

c.Turn main disconnect switch “OFF”.

d.IMPORTANT: Allow the shortening to cool.

CAUTION:

Never clean the

shortening

when it is hot.

Let the shortening

cool sufficiently

before any draining

or cleaning

procedures are

followed.

e. Grasping the swing up handle raise and hold the heating elements halfway up and allow to drain a few seconds as shown in Figure 3- 2. Then raise the elements upright and be sure the locking barhas automatically locked in place before releasing handle as shown in Figure 3-3.

Toastmaster ® 17