Before Brewing for the First Time

CAUTION: To protect against electric shock, do not immerse the Coffee Maker or allow AC cord to come into contact with water or other liquids.

1.Carefully unpack your Coffee Maker. Remove any labels from the outer surfaces.

2. Clean the Carafe, Carafe Lid, Mill & Brew™ Basket and Mill & Brew™ Basket Lid in warm, soapy water. Rinse thoroughly and dry.

3.Fill the Water Reservoir to the 10-cup mark with cold water. Place Carafe onto the Warming Plate.

4. Insert the Mill & Brew™ Basket and Mill & Brew™ Basket Lid into the Coffee Maker, taking care to replace it properly. DO NOT USE COFFEE WHEN CLEANING. USE WATER ONLY. Close the Mill & Brew™ Assembly Lid.

NOTE: The Mill & Brew™ Lid must be closed securely in order for the brew cycle to begin.

5.Plug the Coffee Maker into a 120V AC electrical outlet.

6.Press the Mill Button,, to turn the grinding blades off. The Mill Indicator Light will appear.

7.To start the cleaning cycle, press the Power Button,, and the water will begin to flow the Coffee Maker.

8.When the Carafe is full, press the Power Button,, to turn the unit OFF. Discard the water in the Carafe. Allow the unit to cool for 15 minutes.

9.Refill the Water Reservoir and repeat steps 6-8 one more time.

10. After the second pot of water has cooled, discard the water and thoroughly wash the Carafe, Carafe Lid, Mill & Brew™ Basket and Mill & Brew™ Basket Lid in warm, soapy water. Rinse thoroughly and dry.

Setting the Clock

1.Plug the Coffee Maker into a 120V AC outlet. Display will show 12:00 and will continue to flash until the time is set.

2.Press and hold the Hour Button,, until the LED Display begins to flash. The unit is now in the clock-setting mode.

3.Press the Hour and Minute Buttons,and , to set the correct time. A small dot will appear in the upper left corner of the display to signify A.M. No visible dot indicates P.M. The clock display will flash 5 times, then stop. The time is now set. 5