Programming the Mill

NOTE: If you desire a medium grind, your machine is automatically preset to 4 or a medium grind; refer to step 2 below. If you wish to program a finer or coarser grind, start with step 1.

1.To set the mill to grind the beans to the desired level of coarseness, press the Select Button,, to select different coarseness levels. Seven levels of coarseness are available. Coarseness is deter- mined by the length of time milled - the longer the time, the finer the grind the stronger the flavor. Setting 1 will mill the beans for 15 sec- onds. Setting 7 will mill the beans for 40 seconds. If you do not select a setting the unit will automatically default to setting 4. Make sure the Mill Light is turned off.

NOTE: If you wish to use pre-ground coffee instead of whole coffee beans, press the Mill Button,, and make sure the Mill Indicator Light is on. If you are using whole coffee beans, then the light should be off.

2.Press the Power Button,, to initiate the mill and brew process; the Power Light will turn on. Mill will start. After mill stops, unit will auto-

matically switch to brewing operation. To interrupt milling or brewing press the Power Button,, and the Power Light will turn off.

CAUTION: Do not open Mill & Brew™ Lid until blades and unit operation has come to a complete stop.

3.After brewing is complete, remove Carafe from Warming Plate and serve. Coffee Maker Warming Plate will cycle on and off to maintain proper coffee temperature for one hour before it automatically shuts off and the Power Light turns off.

4.Unplug and allow unit to cool for 10 minutes between cycles. Allow to cool completely before attempting to clean.

WARNING: Warming Plate is hot! Do not touch bottom of Carafe or Warming Plate during or after brewing.

NOTE: After the unit is turned off or automatically shuts off after one hour, mill coarseness setting will default to level 4 (medium grind). Coarseness setting will also default to level 4 in the event of power inter- ruption.

NOTE: The amount of coffee in the Carafe may be slightly less than the amount of water placed in the Water Reservoir, since some of the water is absorbed by the coffee grounds.

7