Maintenance
Do not open the device. It uses delicate electronic components and an intricate air unit that could be damaged. If you can not fix the problem using the troubleshooting instructions, request service from your supplier or from the A&D service group. The A&D service group will provide technical information, spare parts and units to authorized suppliers.
The technical testing procedures, which should be done at least every two years, can be performed either by the manufacturer or by an authorized repair service in accordance with the regulations governing manufacturing of medical products.
| Technical Data |
Type |
|
Measurement method | Oscillometric measurement |
Measurement range | Pressure: 20 - 280 mmHg, Pulse: 40 - 200 beats / minute |
Measurement accuracy | Pressure: ±3 mmHg or 2%, whichever is greater, Pulse: ±5% |
Power supply | 2 x 1.5V alkaline batteries (LR03 or AAA) |
Wrist circumference | 13.5 – 19.5 cm |
Classification | Type BF |
Clinical test | According to ANSI / AAMI |
EMC | IEC |
Operating conditions | +10 °C to +40 °C / 30%RH to 85 %RH |
Storage conditions | −10 °C to +60 °C / 30%RH to 85 %RH |
Dimensions | Approx. 73 [W] x 58 [H] x 79 [D] mm, excluding cuff |
Weight | Approx. 120 g, excluding batteries |
Note:
Specifications are subject to change without prior notice.
ENGLISH 13
