Note:

The device has an automatic power shut-off function, which turns off the power automatically one minute after measurement.

Allow at least ten minutes between measurements on the same person.

Measurements

Note:

The UB-328, once used, will provide an inflation appropriate to the user, based on the previous measurement.

If your systolic pressure is expected to exceed 150 mmHg, read "For those whose systolic pressure is over 150 mmHg" on page 7.

1. Sit comfortably with the cuff at the same level as your heart and relax.

2. Press the START button.

All display symbols appear briefly, then the display changes as indicated in the figure at the right when measurement begins.

The cuff starts to inflate. It is normal for the cuff to feel very tight.

Note:

If you wish to stop inflation at any time, press the START button again.

3. When inflation is complete, deflation starts automatically and the (heart mark) appears to indicate that measurement is in progress.

Once the pulse is detected, the mark flashes with each pulse beat.

Note:

If an appropriate inflation pressure is not obtained, the device starts to inflate again automatically.

ENGLISH 6

Page 7
Image 7
Toastmaster UB-328 instruction manual Measurements