Top Innovations MC1227 warranty Operating Handheld Steam Cleaner, Using The Handheld Steam Cleaner

USING THE HANDHELD STEAM

CLEANER

OPERATING HANDHELD STEAM CLEANER

NOTE: Be sure that Water Reservoir has already been filled and desired attachments are connected before following these steps.

1.Plug power cord into a convenient electrical outlet. Steam Ready Light will immediately illuminate. (Note: Steam Ready Light is illuminated while boiler is heating. This unit has no On/Off power switch.)

CAUTION: This unit uses a grounded (3-prong) electrical plug. Use only in properly installed 3-prong electrical outlets. Do not attempt to alter plug or circumvent this safety feature in any way.

2.Steam Ready Light will deactivate in 3-4 minutes, indicating that

boiler is heated and Handheld Steam Cleaner is ready to begin steaming.

3.Direct Steam Jet Nozzle (and any attachments) towards surface you desire to steam, and press Steam Trigger.

CAUTION: Always be sure that Steam Jet Nozzle and any other attachments are pointed in a safe direction (away from yourself, other people, pets, and plants) before pressing Steam Trigger.

4.Keep Steam Trigger Depressed for a constant stream of steam. Using a slight back-and-forth motion over the area you are steaming will further enhance the cleaning process.

NOTE: During use Steam Ready Light may illuminate. This is normal. If you notice a drop in steam pressure, release Steam Trigger until Steam Ready Light deactivates once again.

5.Once steaming task is complete, immediately unplug power cord from electrical outlet. Follow steps under Proper Storage procedure on page 13 of this manual.

12 Top Innovations, Inc.