USING THE HANDHELD STEAM
CLEANER
FILLING HANDHELD STEAM CLEANER WITH WATER
1.Place Handheld Steam Cleaner on a flat, level surface.
2.Make sure power cord is unplugged from electrical outlet.
3.Press and hold Steam Trigger to ensure that any remaining steam has been emitted from unit.
4.While still depressing Steam Trigger, cautiously unscrew and remove Water Reservoir Cap.
CAUTION: Always press Steam Trigger while unscrewing Water Reservoir Cap. This ensures that any steam inside unit will be safely vented out of nozzle.
5.Allow unit to cool for at least 3 minutes.
WARNING: Always allow unit to cool before adding water. Cold water added to a hot boiler may cause hot water and steam to shoot out of fill hole.
6.Remove Water Reservoir Cap and empty any water remaining in Water Reservoir from previous use.
CAUTION: Emptying unit before filling ensures that proper amount of water is added. Too much water may cause excess water in steam and could damage unit.
7.Fill Measuring Cup to maximum fill line with water (10 oz.)
NOTE: To prolong lifetime of Handheld Steam Cleaner, we recommend using distilled or
8.Carefully pour water from Measuring Cup into Water Reservoir through fill hole.
WARNING: Extreme caution should be used when pouring water into boiler. Do not look directly down fill hole when filling. Keep your free hand and any children or pets at a safe distance.
9.Replace Water Reservoir Cap, using caution not to over tighten it.
Top Innovations, Inc. | 11 |
