Chapter 1 Overview
Using the Fujikura IBC Cleaning Tool
Figure
1
3
2
138658
1
2
Cleaning head | 3 Key |
Alignment edge
Using the Fujikura IBC Cleaning Tool
To operate the cleaning tool, complete the following steps for each ferrule:
Step 1 Attach an
Step 2 Place the proper adapter over the ferrule, as described in this guide. Each type of connector uses a different adapter. The adapter ensures that the cleaning tool is inserted at the correct angle and depth for cleaning.
Step 3 Insert the cleaning head into the adapter so that the cleaning surface sits flush against the ferrule. Align the key with the matching notch in the adapter slot.
Cisco
|
| ||
|
|