Preface
Document Organization
Document Organization
This guide contains the following chapters and appendixes:
•Chapter 1, “Overview,” provides an overview of the
•Chapter 2, “Cleaning the Optical Array Cable Connectors,” provides instructions for cleaning the ferrules in the optical array cable connectors. These connectors are at both ends of the
•Chapter 3, “Cleaning the Bulkhead Array Connectors,” provides instructions for cleaning the optical array connectors located on the S13 cards in the line card chassis to the OIMs in the fabric card chassis.
•Chapter 4, “Cleaning the S2 HBMT Connectors,” provides instructions for cleaning the
•Chapter 5, “Cleaning the OIM HBMT Connectors,” provides instructions for cleaning the HBMT connectors on the rear of the OIMs in the fabric card chassis.
Document Conventions
This guide uses the following conventions:
Caution Means reader be careful. You are capable of doing something that might result in equipment damage or loss of data.
Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual.
Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. To see translations of the warnings that appear in this publication, refer to the Regulatory Compliance and Safety Information document that accompanied this device. Statement 1074
See Regulatory Compliance and Safety Information for the Cisco
Cisco
| vi |
| |
|
|
