Chapter 3 Cleaning the Bulkhead Array Connectors
How to Clean the Bulkhead Array Connectors
How to Clean the Bulkhead Array Connectors
Each bulkhead array connector contains six optical ferrules. To access all ferrules, you must clean three ferrules and then rotate the adapter 180 degrees to clean the remaining three ferrules.
Warning Because invisible radiation may be emitted from the aperture of the port when no fiber cable is connected, avoid exposure to radiation and do not stare into open apertures. Statement 125
Warning Class 1M laser radiation when open. Do not view directly with optical instruments. Statement 281
Caution Before you begin, review the “General Reminders and Warnings” section on page
Cisco
| ||
|
