USING THE
PORTABLE POWER STEAM CLEANER
OPERATING THE PORTABLE POWER STEAM CLEANER
NOTE: Be sure that Boiler has already been filled and that all desired accessories are connected before following these steps.
1.Plug electrical cord into a convenient electrical outlet.
CAUTION: This unit uses a grounded
2.Heating Indicator Light will immediately illuminate, indicating that unit is powered on and Boiler is heating.
3.After approximately 6 minutes, Heating Indicator Light will deactivate. This indicates that Boiler is heated and unit is ready to begin steaming.
4.Direct Main Nozzle (and connected accessories) towards surface you wish to steam, and press Steam Trigger. To sanitize surfaces, point Nozzle, press Trigger and hold approximately 1/2 inch from surface for at least 5 seconds. This will insure that you have killed germs and bacteria.
CAUTION: Always be sure that Main Nozzle and other accessories are pointed in a safe direction (away from yourself, other people, pets, and plants) before pressing Steam Trigger.
5.Keep Steam Trigger depressed for a continuous flow of steam. You may also slide the Steam Lock Switch backward while depressing the Trigger to lock it down (FIGURE 8). This will allow a continuous flow of steam without holding the Trigger manually.
FIGURE 8
6.Using a slight
CAUTION: Wiping the area while it is still wet is recommended, but use care when wiping surfaces such as metal that may still be hot.
NOTE: During use, the Heating Indicator Light may illuminate, accompanied by a slight drop in steam pressure. This is normal.
7.Once steaming tasks are complete, immediately unplug electrical cord from outlet. Follow steps under Proper Storage section on page 13 of this manual.
12 | Top Innovations, Inc. |